Macey's Electrical - Servicing Electrical Utilities - A complete Network of Quality Equipment  
VLF and Cable Diagnostics Primary and Secondary Current Oil Testing Resonant and Impulse Test  
Insulation Test Cable and Fault Location High Voltage Transformer Test  

   Home | About Us | Contact Us | Site Map | All Products |
                                                                                    | Aqua-Tronics | Cable Locators | AT-9X

Product Links
 
Cable Identification
Cable Locators
Primary Cable Fault Locators
Secondary Cable Fault Locators
Temporary Power Restoration
Accessories
 

   

    

 

Aqua-Tronics Inc

AT-9X Power PUP
 
 


Overview

This is a low-cost receiver that is tuned to 50/60Hz and picks up the electromagnetic wave when current is present in the cable. It will detect loaded lines where most others fail, because of the advanced receiver circuitry and precision wound antenna. Not only are low energy signals or waves detected, but also some low impedance grounded faults, underground transformers, and splices can be found. Operating the receiver/antenna "gun" with or without headphones is very simple.

The AT-9X requires less than 1 amp load current to produce an locate 3 feet deep typically. The AT-9X comes complete with a soft foam lined carrying bag designed for rugged protection of the instrument.
 

 

 

Features
  • Low cost receiver.
  • Detects loaded lines where most others fail.
  • Precision wound antenna.
  • Detects low energy waves and signals.
  • Detects low impedance grounded faults.
  • Requires less than one amp load current to locate to depth of three feet.

 

 
  The AT-9X requires less than 1 amp load current to produce an locate 3 feet deep typically. The AT-9X comes complete with a soft foam lined carrying bag designed for rugged protection of the instrument.
 
   
 

  Our Partners -- Your links to our Quality Products