Macey's Electrical - Servicing Electrical Utilities - A complete Network of Quality Equipment  
VLF and Cable Diagnostics Primary and Secondary Current Oil Testing Resonant and Impulse Test  
Insulation Test Cable and Fault Location High Voltage Transformer Test  

   Home | About Us | Contact Us | Site Map | All Products |

   


 

Accessory Links
 
Sewer Snooper
Inductive Coupler
Wireless Inductive Coupler
A-Frame Dual Sensor Probe
Stirrup Probes

  

 

 
                                                            | Aqua-Tronics  | Secondary Cable Fault Locators | EG-3000/EG-3000T  
   EG-3000 and EG-3000T Underground Cable Fault Locators
 
 


Overview
The EG-3000 is a complete system, employing the most effective fault location electronics, plus many features for safety and operational convenience. Most outstanding of these is the system's Automatic Cable-Saving Voltage Control

When pulsing a line to establish a fault, the EG-3000 applies only the breakdown voltage needed. Just as important, once the breakdown or flash to ground is achieved, the voltage is automatically reduced to the minimum amount needed to keep the fault alive and the fault current is increased. Up to 2.2 amps is available to locate through asphalt and concrete or dry sand and soil.

 
  Transmitter
  • Faults up to 20 Meg-ohm.
  • Over 2 amps of current available.
  • Automatic voltage control.
  • Up to 3kv output.
  • Operates from 120v source, 12volt external source, or 12 volt 7Ah rechargeable internal battery.
  • Prevents cable insulation damage.
  • Proof tests cables before returning them into service.
  • Hook-up protection
 

  

Optional Cable Tracer
The EG-3000T is available with a built-in cable tracing system.

It is a highly effective line locator featuring a high gain receiver with a swivel antenna allowing for peak, null, and depth readings with ease. It has a five step impedance matching for maximum tracing ability in all soil conditions.

 

   
 

  Our Partners -- Your links to our Quality Products