Macey's Electrical - Servicing Electrical Utilities - Complete Network of Quality Equipment  
VLF and Cable Diagnostics Primary and Secondary Current Oil Testing Resonant and Impulse Test  
Insulation Test Cable and Fault Location High Voltage Transformer Test  

  Home | About Us | Contact Us | Site Map | All Products |
                                                                                   | Arbiter Systems | Synchronized Power Measurements | 935A

 

  Product Links

  Timing and Frequency
  Synchronized Measurement & Cal
  Power Measurement and Calibration
  Assembled Test Leads
  Fibre-Optic/Copper Signal Adaptor
 

  Documentation

  935ASpecifications

    

 

 

 

 
   
  Model 935A Portable Current Source
 

Overview
The Arbiter Systems Inc. Model 935A Current Source is designed to drive high currents up to 1000 amps rms, through low impedance loads. Output current is produced at the input line frequency through a toroidal current transformer. The input line level is selectable from 100V, 120V, 200V, 220V, and 240 volts rms. An output range selector switch and variable transformer allow easy setting of the output within the attainable range.

 
  Features
  • Drive up to 1000 Amps rms.
  • Input line level selectable from 10 to 240 volts rms.
  • Measure ratio and phase angle errors.
  • Works with Model 936A Reference Current Transformer
    and Model 931A Power System Analyzer.
  The Model 935A is an ideal source for testing instrument current transformers. Use the Model 935A Current Source in conjunction with the Model 931A power System Analyzer and the 936A Reference Current Transformer to accurately measure the ratio and phase angle errors on a wide variety of current transformers.
 
 
 

  Our Partners -- Your links to our Quality Products