Macey's Electrical - Servicing Electrical Utilities - A complete Network of Quality Equipment  
VLF and Cable Diagnostics Primary and Secondary Current Oil Testing Resonant and Impulse Test  
Insulation Test Cable and Fault Location High Voltage Transformer Test  

  Home | About Us | Contact Us | Site Map | All Products |
                                                                                   | Haefely Hipotronics | AC Dielectric Testing Equipment | 7BT60

 
   
   Hipotronics
 
7BT60 Vacuum Interrupter Test Set

   

 

 

 

 


 

 
 

Overview
The Hipotronics Model 7BT60 is a piece of portable 60KV AC (center tapped) dielectric testing equipment designed to test the integrity of vacuum interrupters in switchgear. The output (current limited to 10mA) is programmed to raise voltage at a preset rate to the desired test level.

Once the unit reaches the preset voltage a dwell timer will hold the voltage at that level for the preset time duration. After the dwell time has elapsed, the unit will return to zero. Any failure during the test will be indicated on a "failure" lamp located on the front panel, and the breakdown voltage will be indicated on the Memory KV mete
 

 

Features

  • Automatic testing.
  • 0 to 60kV AC output voltage.
  • Dwell timer.
  • Memory Kilo-voltmeter.
  • Pre-settable output Kilo-voltmeter.
  • Failure indicator lamp.
  • 500 and 3000 V/sec rise time.
  • Removable high voltage section for operator safety.
  • Rugged field case.
  • Field proven reliability.
 
 

Benefits

  • Go, No-Go test - a pass/fail indicator lamp provides immediate, visual indication of test results.
  • Easy to use - with minimum amount of setup time and user training, means testing can start right away.
  • Field portable - this self-contained, single unit is suitable for field use.
  • One step testing - the user sets the desired test parameters and the sequence is automatically run.

Ordering Information

  7BT60-A

Vacuum Interrupter Test Set, 120V AC 60Hz, includes:
One 7.6m Interconnect cable, Two 3m Test Leads, One Power Cord, User's Manual, and Calibration Certificate.

  7BT60-B

Vacuum Interrupter Test Set, 230V AC 50/60Hz, includes:
One 7.6m Interconnect cable, Two 3m Test Leads, One Power Cord, User's Manual, and Calibration Certificate.

   
 
 

  Our Partners -- Your links to our Quality Products