Macey's Electrical - Servicing Electrical Utilities - A complete Network of Quality Equipment  
VLF and Cable Diagnostics Primary and Secondary Current Oil Testing Resonant and Impulse Test  
Insulation Test Cable and Fault Location High Voltage Transformer Test  

  Home | About Us | Contact Us | Site Map | All Products |
                                                                                   | T&R Test Equipment | Secondary Current Injection | 200A-3PH/ED

   200A-3PH/ED 3-Phase Current Injection System
  Product Links
  Primary Injection System
  Secondary Current Injection
  High Voltage AC Test Systems
  High Voltage DC Test Systems
  Data Sheet
  Related Product

DVS3 Digital Voltage Source






  T&R Test Equipment is a market leader in the field of current injection equipment. The range includes single phase units with 50 Amp up to 6000 Amps output capability and three-phase systems up to 200 Amp. All have true RMS metering, a flexible timing system, and an easy to understand user interface.

The 200A-3PH/ED test system provides commissioning and maintenance engineers with a compact, portable, and flexible system for testing protective relays, circuit breakers and thermal overloads. The unit is equally at home testing solid state or electro-magnetic relays, and has a rating suitable for testing thermal trips.

The 200A-3PH/ED has independent true rms digital metering for each output with independently selectable ranges. The outputs are isolated and independently variable and allow the injection of currents up to 200 Amps. The outputs are protected by electronic over-current trips and fuses.

The timing system on the 200A-3PH/ED is flexible and exceptionally easy to use, allowing trip times to be measured to a high degree of accuracy. Units with auxiliary contacts may be timed using the NC or NO timer modes, and devices with no auxiliary contacts may be timed using the current operated mode.




  • 0 to 200 Amps 3-phase output.
  • Accurate true RMS digital metering.
  • All outputs fully isolated.
  • Multi-function 1ms resolution timing system.
  • Auxiliary AC output.
  • Electronic over-current protection.
  • Compact and portable.


  The unit is ideal for testing the following devices:
Over and under current relays IDMT relays Thermal overloads ● Magnetic circuit breakers

The unit may also be used in conjunction with the DVS3 digital voltage source to test protection systems requiring three voltages and three currents. Protection that may be tested in conjunction with the DVS3 includes:
● Directional relays ● Distance protection ● Power relays and transducers

Ordering Information


3-Phase Current Injection System, supplied with:  Output Lead Set, Mains lead,
Spare fuse set, and Operating manual. (see included lead set description below)

   Note: The 200A-3PH/ED instrument is supplied with an Operating manual, Mains lead, Spare fuse set,
   and a 5 meter 200AL/3PH output lead set.



  Our Partners -- Your links to our Quality Products