Macey's Electrical - Serving Electrical Utilities - A Network of Quality Equipment

Arbiter Systems Inc.


Product Links

1040C/CU Panel Meter Calibrator
921A Combustible Gas Meter
928A Power System Multimeter
929A Three Phase Power Meter
930A Three Phase Power Meter
931A Power System Analyzer




Related Products

Model 929A Three Phase Power Meter

929A Three Phase Power

Model 931A Three Phase Power System Analyzer

931A Three Phase Power System Analyzer




Home | Arbiter-Systems | Power Measurement and Calibration |


Arbiter Systems Logo

930A Three Phase Power Analyzer - Overview

The Arbiter Systems® Inc. Model 930A Three Phase Power Analyzer is an economical alternative to the Model 931A Power System Analyzer when the DC voltage measurement transducer calibration and timer features are not required. The Model 930A has the same AC accuracy as the Model 931A with PowerDSA™ Digital Signal Analysis. Basic accuracy of 0.05% of reading and 0.05° phase, harmonic analysis, and full three-phase capability are standard.

The Model 930A includes serial communication capability. Combined with the available application software and laptop computer, is a valuable tool for use in power quality trend monitoring, as well as being a complete diagnostic tool for use in the substation and industrial power environment.


Arbiter Systems Model 930A Three Phase Power Analyzer


  • High accuracy measurements.
  • PowerDSA Digital Signal Analysis.
  • Complete diagnostic functions for use in substation and industrial environments.
  • Serial Communications supports power quality trend monitoring with included software.
  • Field ready.
  • Multiple display options including three-phase displays.
  • Basic three-phase display - voltage, current, phase, frequency and power quantities on one convenient display.: Vector, voltage/current sequence and energy displays.

Model 930A measures all the basic quantities: true-rms voltage and current, frequency and phase angle, as well as power quantities such as watts (W), watthours (Wh), volt-amperes (VA), volt-ampere hours (VAh), volt-amperes reactive (VAR), volt-amperes reactive (VARh), and power factor (PF), all with 0.11% basic accuracy.

Measure harmonics and view the results graphically on the high contrast 240 x 64 graphic display. The two channels are normalized to Channel 1 fundamental phase, so you can see, for example, the relationship between current waveform distortion and voltage phase.

The 930A include a full three-phase input section, for automated three-phase measurement sequences, complete with multiple display modes:

Vector Display View voltages, currents and phase angles with their vector representation.
Voltage /Current Sequence Display ― view voltage, current and phase along with positive, negative and zero sequence values.
Energy Display ― view voltage, current, phase, frequency and energy quantities on one convenient display.

Configuration Note
Supports two main measurement channels. Channel 1 and channel 2. Any voltage or current input signal may be selected for either channel. For basic measurements (voltage, current, frequency, phase angle) any combinations of inputs may be used. For power and energy measurements (active power, apparent power, reactive power and power factor), one voltage and one current must be selected. For three-phase measurements, the input configuration is selected automatically, based on the measurement type (foe example, 3-phase 4-wire 3-element).


Our Partners



Home | Products | Search | Site Map |


Macey's Electrical Pty. Ltd.
ABN 17 344 601 468
Unit 1, 49 Gavenlock Road, Tuggerah, NSW Australia 2259
Phone: +61 2 4353 4644    Mobile: 0412 678 925