Macey's Electrical - Serving Electrical Utilities - A Network of Quality Equipment

Haefely Hipotronics

 


Product Links

2820A C, L, & Tan Delta Bridge
2830/31 Oil & Solid Dielectric Anal.
2840 High Precision Tan Delta Sys.
2883 MIDAS Micro
2903 Test Cell Liquid Insulants
2914 Test Cell Solid Insulants
MIDAS Mobile Analyzing System

 

 

Documentation

 

 

 

Applications

Transformer Oil
Oil Paper
Solid materials (Teflon,
   Silicone, Rubber etc)

The 2830/2831 is a valuable tool for factory tests, routine tests, R&D tests and regular maintenance.

 
 
 

Related Products

 

Model 2840 High Precision C, L, Tan Measuring Bridge

 

2840 High Precision C, L, Tan Measuring Bridge

 
 

Home | Products | Haefely-Hipotronics | Power Factor Tester/Tan Delta | 2830/2831 Oil and Solid Dielectric Analyzer

 

HAEFELY Hipotronics Logo

2830/2831 Oil and Solid Dielectric Analyzer - Overview
 

Overview
The Tettex 2830/2831 is the result of extensive research and years of experience testing dielectric properties of liquid and solid insulating materials. It incorporates a fast and highly advanced procedure to measure Capacitance and tan delta, DC resistance and relative permittivity Ɛr (dielectric constant) of liquid or solid insulating materials.

A simple one-time-connection system together with resistance measurement according to pre-selected standards drastically reduces measuring time. The system consists of 2830, the measuring bridge and control unit, and 2831, the extension unit.

The 2830 contains the controller and the measurement part of the system
The 2831 extension unit contains a standard capacitor, 2.5kV AC and DC supplies and a Temperature Control Unit.

Up to two oil test cells (type 2903 or one solid test cell (type 2914) can be heated at the same time.
 


2830/2831 Oil and Solid Dielectric Analyzer

Features and Benefits
  • C and Tan δ measurement, DC resistance measurement and relative permittivity Ɛr on liquid and solid insulating materials made easy - simple one-time-connection.
  • Large 12-inch TFT display with touch screen interface and full graphical test visualization.
  • Pre-selected oil-testing standards selectable IEC, VDE, BS, ASTM.
  • Customized programmable sequence and manual mode.
  • Integrated AC power supply 0 to 2,500 volts and 40Hz to 65Hz adjustable control.
  • Integrated DC - Power Supply 250 Volts to 2.5kV adjustable.
  • Two (2) independent integrated temperature control units.
  • Integrated ambient temperature and humidity sensor.
  • Place to connect two oil test cell heater 2903 or one solid test cell 2914.
  • Data transfer over USB memory-stick.

Specifications

Measurement (2830)

Range

Max. Resolution

Accuracy

Dissipation Factor (Tan δ) Note 1

0 to 100

1 x 10-6

0.5% of rdg 1 x 10-5 Note 3

Capacitance Note 5

≥ 0.01pF

0.001pF

0.2% of rdg 0.01pF

Relative Permittivity  Ɛr

1 to 30

1 x 10-6

Resistivity

1MΩm to 30TΩm

1 x 10-3

Test Current at Input Cx

10A to 15A

0.01A

0.1% of rdg 0.1A

Test Current at Cn

10A to 300mA

0.01A

0.1% of rdg 0.1A

Test Frequency

15 to 1000Hz

0.01Hz

0.1% of rdg 0.1Hz

 

Power Supplies (2831)

Range

Max. Resolution

Accuracy

AC Test Voltage

0 to 2500 Volts AC

1 Volt

0.3% of rdg 1V

AC Frequency

40Hz to 65Hz

0.1Hz

AC Current (maximum)

4mA

DC Test Voltage

250Volts to 2500 Volts

25 Volts

10% of rdg +20V

 

Heater Controller

Range

Max. Resolution

Accuracy

Heater Controller

300C (Ambient)

0.1C

0.5C

 

Internal Standard Capacitor Note 2

Value

Max. Resolution

Accuracy

Dissipation Factor (Tan δ)

2 x 10-5

2 x 10-5

Capacitance

1nF 5% at 25C

20ppm/C

 

Environmental

Operating Temperature

-10C to 50C

Storage Temperature

-20C to 70C

Humidity (maximum)

90% R.H non-condensing

 

Standards

Programmed Standards

IEC 60247:2004; ASTM D924-08; ASTM D1169:2002; VDE 0380-2:2005; BS 5737:1979

Protected Classes, Standards

IP20, IEC 61010, CE mark
General IEC 61326-1, IEC 61000-4-X, IEC 61000-3-X, EN 55011, ANSI/IEEE C37.90

Safety Specification

VDE 0411/part 1a, IEC/EN 61010-1:2002

 

General Specifications

Display

12-inch TFT, 800 x 600, integrated Touch-Screen

Operating System

Embedded Windows XP

Interfaces

Three (3) USB ports, One (1) Ethernet 10/100 Note 4

Data Format

XML, CSV

Power Supply

90V to 264V AC 50/60Hz, 1.7kVA

Dimensions (both models)

48cm (W) x 27cm (H) x 44cm (D)

Weight

Model 2830: 21kg

 

Model 2831: 19kg

 

Note 1:

Accuracy values at 50/60Hz

Note 2:

External Cn can be used with the system

Note 3:

Absolute Tan δ accuracy equal to accuracy of Measurement and Standard capacitor

Note 4:

External Ethernet switch needed (Connection is also used for 2831 Extension unit control)

Note 5:

Range limit is given by test current and voltage of used power source
 

Ordering Information

Haefely Hipotronics 2830/2831

Oil and solid dielectric analyzer, includes Test Certificate, Set of connections cables and User Manual

   

Our Partners

  

     
 

Home | Products | Search | Site Map |

 
 

Macey's Electrical Pty. Ltd.
ABN 17 344 601 468
Unit 1, 49 Gavenlock Road, Tuggerah, NSW Australia 2259
Phone: +61 2 4353 4644    Mobile: 0412 678 925
Email: sales@maceyselectrical.com.au